A new bike requires new protection, so AltRider completely redesigned the crash bars for the new water boxer model. A step up from years past, they utilize 1.25“ (31.75 mm) O.D. stainless steel tubing making them the largest diameter bars on the market. The decision to increase the diameter came from years of research and production results. The West Coast BMW Off-Road Training School has been outfitting their bikes with AltRider gear for the past 3 years. This real world testing yielded much insight on how much damage large bikes can do during crashes. The 1” bars (25.4 mm) allow a significant amount of flex during a crash, creating the need to space them farther from the bike. The stout 1.25” bars allow a tighter profile while still providing real protection. Available in shot peen satin or black powder coat finish, you’ll never have to worry about rust whether you’re riding the liquid cooled GS across the highway or across a river.
The top of the bars are secured in a total of three locations per side. The front mount is the only one on the market designed to utilize 2 bolts per side to increase the ability to distribute the load of any impact. The rear is held with a custom machined through-bolt that replaces the engine mount hardware. There are no plastic spacers to break upon impact. This creates an incredibly strong design that distributes any impact evenly throughout the bars, and also makes a solid foundation for upper crash bars.
Another first for AltRider crash bars are the integrated 3/16” (4.76 mm) lower flanges designed to interface with an AltRider skid plate. This creates a modular protection system that doesn’t mount directly to the motor and is substantially more robust than anything else on the market.
Other bars are fabricated by crimping then welding joints, creating a forced fit with a weak bond. In this method, gaps are created which are later filled with weld. The additional heat causes warpage and all-too-common installation difficulties. All AltRider joints are 5-axis laser cut, creating a perfect union before the bars are hand TIG welded in a jig. This process creates a precision fit, easy installation and superior strength. Using only the best manufacturing techniques means all AtlRider motorcycle accessories are of the highest quality, ensuring the best protection for your adventure bike.
Installation is simple and straightforward. All necessary hardware, including a difficult to find T55 bit, is provided with the bars.
-100% designed and manufactured in the USA
-1.25” (31.75 mm) stainless steel tubing
-5-axis laser cut and hand TIG welded joints
Dimensional weight listed. AltRider products cannot be shipped to Canadian addresses.
AltRider R1200GS (2013) Crash Bars
Produced by AltRider of USA
